Zettai Ryouiki socks for Dollfie Dream...

You will need:

* A Dollfie Dream to lend you her leg (or a different doll if you prefer)
* Light colour knit fabric (example thin tee-shirt material)
* Paper
* Eraser (in case of mistakes, or if you are going to trace with a pen after)
* Pencil (Optional, a pen)
* Ruler — if you prefer to make a shorter pair of socks
* Scissors for cutting out the pattern
* Scissors for the fabric
* Sewing machine with light thread (not pictured above) Please use ball-point needle for knit fabric!

1) Position your dollfie’s leg on the edge of the paper as shown above...

5) Carefully cut around the pattern with the scissors for cutting fabric.

12) When sewing around the corners, go slow and raise the presser foot time to time (With the needle in down position), use your right hand to stop the machine or roll the needle into down position before lifting the presser foot to prevent the fabric from moving from it’s position.

13) After the straight stitching completed for both socks, it will look as above, you can chose to turn the socks inside out at this stage and call it done, but I would recommend an extra step.

Go slow around the corners, and do the lifting of pressure foot (With the needle in the down position) when needed.

*fast forward chipmunk sound* Tadah! Hope this tutorial is not too confusing ^^; Haven’t made one in a long time :P

Nyan, completed socks on Dollfie Dream ^o^

White version Om nom nom...