Can you do the same pose with me? ～ ^_^a ( It need a surgical operation... )
Fri 2010/09/10 02:22 JST
Kotonoha : 「Koyuki, can you do the same hand pose with me?」
Koyuki : 「Of course, I will do the same hand pose with you.」
Kotonoha : 「Ok, let's do it!」
Koyuki : 「That's no problem.」
After several hand poses, Koyuki finds some problems... She can not do the same hand pose with Kotonoha.
Koyuki (heart voice) : 「I will ask Papa to do the same operation for me .」
言葉: 「小雪，妳能跟我做出相同的手勢嗎？」
小雪: 「當然，我會和妳做出相同的手勢。」
言葉: 「好，讓我們一起做吧！」
小雪: 「沒有問題。」
經過幾個手勢之後，小雪發現一些問題... 她沒辦法跟言葉做出相同的手勢。
小雪 (心之聲): 「我將會請爸爸幫我做相同的手術。」
＊I prepare two kinds of language in article, please choose the one that you like to read. ～ ^_^
＊我在內文中準備了兩種語言，請選擇你喜歡的來閱讀。～ ^_^
View point is here, I add a 360 degree rotate joint.～ ^_^
oh! is there a screw going into the rotate joint?
Yes, there is a screw going into the rotate joint.～ ^_^
The screw is normal, the specification is used on a desktop computer.～ XD
The structure is very strong(use ABS plastic material), can be used without worry.～ ^o^/
So the part which is insert into the hand, you removed a bit so to insert the screw is easier? I notice the round base (near to the ball joint) look like it is removed a bit too :D -- thank you so much for the information and for answering my questions! :)
Yes, it's right.～ ^_^///
Other detailed additional remark can be found under...↓↓↓(the reply to "Tsun-chan")
I hope that will be useful to you.～ ^o^/
awww thank you for sharing (Even if there is no photo) XD
My english is not very well, I can't sure that I have wrote can be understood by you.
Maybe something will be left out.～ XD
If you really want to try it, I will give some proposition to you.～ ^o^/
Hallo! Don't worry if I try to do it I will ask my husband for help XD He may have some of the parts :)
That will be ok.～ ^o^/
nice !
Thanks to you！～ \^o^/
That's awesome! It's such a standard joint on 1/6 scale figures (Sideshow, Hot Toys), I miss it on Dollfies. If Volks sold just the wrist piece I'd totally try this.
I am glad that you like it.～ ^o^/
The wrist on DD is omittted a rotate joint, so I make it.～ ^_^a
＞If Volks sold just the wrist piece I'd totally try this.
↑The probability is so low, refit it by self will be fast.～ XD
According to some translations of the DD Sister announcement, beginning with DDS Volks will be selling all parts for their Dollfie Dreams. Apparently DD Sister might be the beginning of a new iteration of the body.
Oh yeah, my friend Biff who did faceups of three out of four of my brood has just acquired a Dollfie Dream 1, the original strung version of the body. She's got plans for it. I told her you guys will prolly be interested in seeing it so hopefully she'll post pics of it here.
Parts of DD... I don't have much expectation on it.～ XD
As I can see the parts to release, I will think about it at that time.
Dollfie Dream 1...? It's really very old type.～ ^_^a
But she will be welcome, hope to see her someday.～ ^o^/
Nice! Where does the rotate joint come from, or did you make it?
Thanks to you！～ \^o^/
The rotate joint is made by myself.～ ^_^///
It is made by some ABS plastic board+pipe, and be used a screw to fix it.
^.^b
I think that you may feel the saw and the art cutter are dangerous; in fact,they are really very dangerous.～ ＞﹏＜|||
But if want to achieve some purpose, some danger may be necessary.～ XD
So I just make it very carefully.～ ^_^a
Double Hadouken! :3
Ho～ Ho～ This is funny that I think so too.～ XD
Interesting modification.. but between 6 and 7 you forgot a couple of steps.. may want to add those.. and were did the handy new peice come from.. was it modified from the original peice?
Also, some of the hand positions.. if you try them yourself.. are actually in my opinion over stretching the ligaments.. which equals not very comfortable.. but more range of motion is a good thing since it is so limited.
I don't forget it, it is a original secret of myself.～ XD
＊The omittted steps are...↓↓ (It is sorry that I will not provide photo.～ ^_^a///)
6.1－ Cut the unnecessary part of the「□」parts, and open a 5mm width hole on the buttom side.
6.2－ Another ball joint parts still has a flat surface, open a 5mm width hole in the center too.
Aad then prepare a 5mm ABS pipe(with a 3mm hole in the center), just stick the ABS pipe on the ball joint parts.
6.3－ Set the 「ㄩ」parts through the ball joint parts, and use a screw to fix it.(←The screw is used on a desktop computer, not difficult to get it.)
Sorry, I type a wrong word.～ XD
↑↑"Aad"－ ╳ ／ "And"－○
Nice!
Danny, thank you．～ \^o^/
不錯哦~
哦～ 謝謝囉～ ^_^
第二次看到你用中文回應，往後我要用中文回覆嗎？～ XD
(If you can not understand the words of upper, please tell me. Otherwise, I will reply you by Chinese.～ ^_^)
Wow... nice!
Ausra, thank you．～ ^_^///
This is very interesting! Thanks for sharing~ looks good :D
This refit is useful to express many kind of hand poses, it not easy to refit but really be worth to try.～ ^_^