My Gunpla, My Work

MG 1/100 Raven Strike
It's my first kit which i painted completely. This is my first time adding panel line detail, i used tamiya scriber and the channel become so big :D.

Raven idea come when i see Jehuty from Zone Of The Ender, i really want to make some mecha which has line detail and it glows. At the beginning , i'm planning to use some led inside the body, but i rethink again ... That won't work. I won't be able to turn on the led all the day, so i'm thinking about using a color illusion tech.

I painted all the armor with dark gray, i'm still remember the paint i used, it was Mr Color 36 RLM74 GRAY GREEN, and the Frame with Red which is Gundam Color 02 Red 1 and with some black in the armor. I do a lot of masking to make the color scheme work, the hardest one is on the head. The red lining is the hardest one, i have to paint it with white enamel paint first, if not the red won't shine. When i put the red on the white, they are mixing into pink... At the end use the same red as the frame which is lacquer, so they won't mix with the white.

Last, i create some fictional story to explain why the frame and the lining is red :p

1 month after Archangel Arrived at Alaska, O.M.N.I. start to make new M.S. based on Strike data. They developing a new system called Raven, it works on the same way with phase shift, distributes energy to all body,the difference is Raven system also transfer an extremely high temperature heat which makes Raven radiates heat. Everything touched by Raven will be destroyed by the heat which make weapon such as ammo and beam won't work on it .The Pilot able to focus the energy transfer to one point to make an even greater damage to the enemy

Raven use different type or armor , it has some gel inside it to absorb the heat and the armor were cut to smaller pieces than normal strike, to allow the heat to get out from the machines [most of them even had cooling system] . The Raven System only activated in the main frame [skeleton] and in a few other parts

Dark room with one light :D

I used a lot of decal, i just love decal :D And 1 cute decal on the left skirt, i remember when i played acecombat 2[flight simulation game], the special plane used to have some cool insignia, or even a picture of girl. So i decided to put 1 picture of devil which hair is red. That makes it a "red devil" lol.

This is my second kit : MG Gouf Custom

It was an old kit, i remember when the first time i snap fitted it, it's event kinda hard to pose and move. I decided to custom my gouf custom lol. I'm practicing panel lining with this kit. This time i use hasegawa scriber which looks like a pen and it works good.At first it's hard to make one straight and good loking panel line, but practice makes perfect. Now i can do it pretty fast :D. This is also my first time added some hole detail on my kit, using tamiya pinvise.

Vixion using drill on Gouf Custom!! It's Super Effective. No , i'm really serious. If you want to add simple detail to your kit, drill it and it looks a lot of cooler. It's simple but efective. Just don't do it too much .Well the first time i'm using a drill, i almost drilled the whole body lol, try to mark it with pencil first, and checked if it was good or not. Sometimes too much hole will make your kit looks crowded :D

I used my own color scheme for this gouf. I mixed some blue, with white and purple to create this color. The reason why i choose this colour, i saw a Ramba Ral's Fanart and it's using this blue color. Since this is my own custom, i put my insignia on the chest, it was really hard to scribe :D
I used Purple and gray lining rather than black lining, it makes the detail looks softer. The Silver lining for the black :D The picture above is a new one, i t was take 1 year ago, below were the pictr i took when it was done

The 2nd Strike

This time i try to do pa plate detailing, added a lof of pla plate, but it so small, that hard to notice. At the beginning i want to continue the Raven Story with this one, but this one can't match raven, i decided to put this one out of the story. This is the first time i cut the V on the Gundam, why i do that? the V restricted the head movement, it stuck between the iwsp railgun.

I experience a very terrible frost bite with this kit. I re-painted it, and i like the result... That time there was a dilemma, i like the semi-gloss finishing but most of gunpla were flat finished. Finally i use the flat topcoat again... And it was frostbite...I'm really sorry. That day i decided, my gunpla didn't have to has Flat Finished. I wil use whatever finished i feel good.

1/144 HG Phantomflag

It was 00 Season 1 and i watched Graham Acre fight all the Gundam with his Overflag. He is so cool. Exia runaway when facing him, Lock On have to change his name to "Miss On" [he missed twice and he have to use the beam saber to face him], defeating throne ein and grabbed the beam saber. He is so badass. I decided to make one special overflag for him, one to catch dan destroy Exia.

So, i'm thinking... What is needed to catch Exia? The Answer is Speed and Projectile Weapon. So i created overflag with a lot of booster and projectile weapon called Phantomflag. Phantomflag equipped with 2 extra thruster , 4 removeable bosster pack, and 4 extra linear gun [2 on the booster pack and 2 on the leg]. Like a plane in the military , the linear gun in booster pack can be replaced with fuel tank for a long time mission, i made the concept but i didn't make the fuel tank sorry :). Why a railgun? Railgun is really effective against exia, based on the story. It disrupt Exia's balance which enable graham to take his plasma beam cutter and then cut Exia, but it must be done really fast. The Railgun is used to attack and defend at the sometime, most exia weapon is melee type, when exia got too near and graham think the situation is unfavorable, he can shoot it , to avoid exia till "the time" comes.

Most of the detail modification were based on an Overflag by "Seira "Masuo" in Hobby Japan. The Booster pack were from Ex-Sentinel [ex model] and hg 1/144 serpent custom [endless waltz] got it really cheap. The gun on the leg were scratbuild. Just do a simple one that time. I do a lot of panel lining and pla plate detail, most of part were cutted a little to make detail., add some armor on the leg made by epoxy putty. I put a lot of detail,at the end i have no place for decal lol.

When The Booster Pack is ran Out of fuel, it becomes burden. It can be detached. It becomes a normal overflag with extra booster and linear gun. But, i prefer do "Backpack Ram" , launch the booster pack to the enemy and blew it lol.

HG 1/144 Amaterasu

I really like Masurao, but bandai release the susanowo first and i bought it believed bandai never release the Masurao. Kinda dissapointed when bandai release Masurao with so much better part :(. I Sharpened almost all of this kits part, the blade, the horn , the armor etc makes this kit looks tougher. Added a really small cut part detail on the shoulder armor [black one] , leg armor [red] as you can see above, head and other parts which were hard to notice ^^ and a few small hole detail. I removed the Shoe part which i reallly hate since it was too big and looks funny. I want my susanowo looks elegant but deadly. Changed the chest armor part with freedom chest armor part [cockpit part], i lost the susanowo's.

Back then i'm testing a new paint called gaia, people said it's metallic color is very good. So i painted my susanowo with that.I use star bright silver for the frame and weapon, the ex-02 black for the black, and star bright silver + clear red [ i didn't mix it, i spray the clear red after the silver dry] for the metallic red. About the gold, i didn't plan that . That time, i want to test the Star Bright Gold, which was said really good. I'm wondering , where should i put this gold on my susanowo? First i paint it on the leg armor on the back, and the result is amaze me. I really love the gold color, it's shiny and the particle is so smooth. Then , i'm thinking... why not applying this gold to the white part and make a new color scheme? I do that, and the result is this kit, i called it Amaterasu , which name were taken from the same legend as Susanowo.

HG 1/144 Unicorn

At the beginning, i want to paint this OOB with a little shading and make K.A. ver by putting a lot of decal on it. But a little accident happen and it change everything... I was mixing some blue with white for the highlight on the shoe... Somehow i can't make a right colour, the highlight were to bright... so i'm continuing on mixing, finally it was done... But there is so many leftover paint, so i put them together, then i found this blue colour. A really interesting colour. I tried it on the chest armor, the combination looks great. Finally i decided to make a different ver of unicorn. I do a lot of masking on the kit, while imagining the destroy mode ver. I use red and purple color for the lining, make it looks like gonna change into destroy mode. Finally , i put a lot of decal.

The Unicorn Symbol

HG 1/144 Geara Zulu

When i see the geara zulu design, this guy looks like a nazi army. So i made one nazi custom geara zulu :D. I'm using some really dark blue colour for the main color, do a little white stripping and paint some silver for the frame, thruster and detail. The only extra detail in this kit is on the shield. The kit itself is so good, it didn't need any extra detail. The hardest part of this thing is the Sturm Faust. It is only made by 3 part and the color is same. I do a lot of masking on that thing , put some red line which make it looks like a warning line. Now, it looks better :D

I like this pose :D

The Sturm Faust i mentioned above

HG 1/144 H.I.G.H. Nu Gundam

Me and my friends doing some group build. Each of us made 1 HGUC Hi-nu. This is my hi-nu. I'm trying to change it's proportion, based on some artwork on the internet. I made it higher than normal, and the hand is longer than normal. It was a hard one, i nearly give up. It's really hard to change proportion, and i don't know if i want to do this again. It's height is 18 cm , added around 2 cm. At the beginning i just want to change the proprtion, but after that... the beam rifle looks smaller and the bazooka can't be used... I quess i have to modify the weapon , to match with body, So i make a bigger beam rifle which design is based on starcraft rifle, huge and bulky on the front. Added beam saber under the rifle like a world war gun which usually has a knife under it.

About the v-fin, i accidently broke it... Teehee.jpg. But i like the way it looked now

Upgraded the booster in the back , which is in the middle. It was too small , it needs a bigger one. I made it from some leftover, and fill it with epoxy putty and added 3 metal part which looks like a booster. I have no idea what they are. I buy these metal parts at accessories store. They works fine on the Gundam, i also used it on the rifle. After checking the data of it's archenemy which is nightingale which has 10 funnel [Hi-nu only has 6], i think i need to add some weapon. Since i can't add more fin funnel , i decided to add Missile Pack. It was from Arios GNHW, I glued it using power glue, and it looks good. Most of people think my hi-nu looks like freedom gundam lol.

I decided to make camouflage when i paint it, i 'm not quite sure what style i used. The reason i do this is, hi -nu didn't have too many detail, and i don't have time to add more detail to it, it's almost deadline when i made this.This is my option, so i mask all of them , make some random pattern, and hope it works. and here goes the result :)

Like i told you before , there is a beam saber under the rifle :D

This is how it looks without funnel :D kinda like it

HG 1/144 iX Gundam

Actually i'm chalengging myself when i made this kit, how fast i can made a completely paint kit. so i'm focusing on makin this kit. It takes about about 1 week, off course i still have enough sleep, enough eat , enough anime and enough chat with my friend At the beginning i want to use the Rick Aller/Kai color scheme [u can check it at mahq]. But it's too monotone for me, so i try my own color scheme based on rick aller. I use a lot of decal as usual, since this HGUC was designed by Katoki , who likes to put a lot of decal on his design :D The GX decal was ordered from samuel decal, luckily it works fine with my color scheme. If you notice the exhaust's inside on the chest wasn't painted, i use some pencil to colored it.. It works munch better that i expected, it gives some steel feeling.

I decided to use sticker on the satelite cannon , the sticker is so cool, it's sparkling and hologram , really like the effect

HG 1/144 Zabanya Assault

When i see HG Zabanya from 00 , i know this a good kit. I like the body design but i hate GN Holster Bit, they looked like a fench for me. So i removed them and make my own version of Zabanya which is zabanya assault. I do a lot of modification this time. I used a lot of evergreen pla plate , some wave vernier, kotobukiya optional part, a lot of panel lining for this kit, made some extra weapon , and a lot of masking especially the red stripes. Masking makes the kit looks better, before i masked it, this kit looks so plain.

The Concept of Zabanya Assault is a long range artillerry unit which can shoot from outside the battlefield, equipped with a long range mega gn particle cannon which range is the same as memento mori [2nd season episode 11] even far more when trans-arm.

Other Equipment:
2 standard zabanya gn beam rifle
9x gn micro missile [the same as zabanya]

1 GN Gatling with ARMS [Automatic Revolving Machine System] which able to rotate 360 degree and attack all area all around zabanya ,it's able to shoot in front of cockpit. It is used to protect zabanya from enemy[mid range] when using the mega gn particle. It was controlled by haro so the pilot can focus with the mega gn particle.

2x beam sword mounted on the gatling
Zabanya assault also have 1 extra censor on the left chest, it was protected by the chest armor. The big bottom part design is too hold all the body when shooting the mega particle and also for GN Particle Storage.

Zabanya Assault is the prototype of zabanya in the movie. When Ian told Lockon about this unit, Lockon ask Ian to build a unit which fitted for him based on this, lockon said he prefer the unit which can attack multiple enemy in one time [zabanya] rather than focusing on 1 target. However when Ian told lockon the Zabanya Assault is already done, so Ian build another Zabanya based on this.Zabanya Assault were put in the Celestiasl Being Factory and equipped with GN-Drive Tau

it's a fan fiction by me which is the base idea for zabanya assault

I change the place of Zabanya Booster from the butt to it's back.I'm using a converter which made by epoxy putty to do this. I'm putting some cherudim part on it as a gun holster.

The ARMS for holding the gatling gun were made from the original zabanya GN Holster connector. The gatling gun itself is from HG 1/144 Serpent Custom, this kit really has a lot of good part for cannibal

The Beam saber which were attached to gatling ARMS

I made a custom canon using beam rifle from arios GNHW and a pen body, i attached the pen and glued it with power glue, then put some epoxy putty on it, to make sure it won't move and detach. Then i reshape the rifle and add some detail.

Thank you for reading this post, i hope you guys didn't get bored because this is too long.

Once again thank you :)