FigNendo's Ark

Fri 2009/11/27 23:10 JST
 15
4001 views
 by 
yunamon

After witnessing the incredible transports with some of the meanest security for their Nendoroids and Figmas last week during AFA09, I've decided to expand mine due to the increasing number of the occupants... ^^;

Currently I only have a quad of transports, each capable of carrying only a single Figma or Nendo, with the 4 of them able to dock into the larger carrier... Got a briefcase type plastic carrier in pink... Because I'm obsessed with pink, thank you... ^^;

> Img ID#33031 | New tab | Mouseover = load notes.

Did some customisations onto the inner side of the carrier, filling them up with bubble wraps... It's a good thing I keep all my bubble wraps from those parcels... ^_^

> Img ID#33032 | New tab | Mouseover = load notes.

After some cutting and sticking using double sided tapes, the carrier is complete!

> Img ID#33033 | New tab | Mouseover = load notes.

Nendo took almost all of the upper compartments...

> Img ID#33030 | New tab | Mouseover = load notes.

Whilst the Figma took the basement... ^_~

Even with the new carrier, its bunkers are almost full... If the FigNendo grows in number any longer, I'll have to get another one... ^^;

Originally hailed from the Republic...

Author
 
yunamon in a comfy chair above you influencing the FigNendo Wars... (Registered on 2009/03/31)
Otaku Graphic Designer
http://neoprolacus.spaces.live.com
yunamon is a character I created years ago... I'm a dedicated Digimon fan then and I was trying to create one using a hybrid of Angemon and Angewomon. Then I need a name... At that time Yuna was a wide known figure as the summoner in FFX... voila!
yunamon's previously posted items
Tweet this!
  •  
    theorist in Krakow, Poland (Registered on 2008/07/04)
    Military

    buble wraps my fingers itching

    Fri 2009/11/27 23:48:10 JST (ID #57424)
    Reply
  •  
    Shazz in Singapore/Australia (Registered on 2009/11/06)
    Combat Engineer (NSF) /Student
    http://unlimitedotakuworks.wordpress.com

    Oh wow I used to do that with my Warhammer 40k models. Not a bad idea for mass transportation of nendoroids. Hmm when I used my carrier for Warhammer, I found that if you didn;t fill the left over space with something (I suggest something soft like a sponge), the pieces would bounce and causing damage, denting or even scratches. For nendoroids it seems fine cause they are small parts. For figmas it seems less advisable though. Not sure, might think of a way or experiment.

    I found that tupperware boxes (with the figmas just fitting perfectly) inside filled with bubble wrap or sponge did the trick so that way they wouldn't move around alot when being transported.

    Sat 2009/11/28 00:35:41 JST (ID #57433)
    Reply
  •  
    tamerchris in Malaysia (Registered on 2007/12/07)
    Otaku in the Making
    http://www.flickr.com/photos/31219625@N03/

    Wow, your carrier is jam-packed. Good thing it comes with 2 layers.
    Alpha-unit...nice name. ^^

    Sat 2009/11/28 03:06:03 JST (ID #57446)
    Reply
  •  
    pus2meong in the Land of Twilight, Under the Moon (Registered on 2007/12/15)
    Self Employee NEET
    http://www.nekoroid.com

    My hands are to itchy and blew all of the bubble wrap I got T_T
    Now I must find other solution to replacing the bubble wrap because I want to make the same "ark" like yours ^^;

    Sat 2009/11/28 03:11:54 JST (ID #57448)
    Reply
  •  
    pariah in Canada (Registered on 2009/11/02)
    Student

    Nice job.

    Sat 2009/11/28 04:22:21 JST (ID #57460)
    Reply
  •  
    Yangth in MN, USA (Registered on 2009/05/23)
    Student - Video Game Design & Development

    Nice carrier! I definitely need something to carry my FigNendo accessories in too. The box won't last forever...

    Sat 2009/11/28 06:20:15 JST (ID #57469)
    Reply
  •  
    moemoekyun! in unknown (Registered on 2009/10/09)
    NEET

    no you cut them piece by piece are you a psyco cannibal >_< LOL

    Sat 2009/11/28 06:22:15 JST (ID #57471)
    Reply
  •  
    Vixums (Registered on 2009/08/20)
    http://vixums.wordpress.com/

    Well that's some insane protection, but I don't blame you, I wouldn't want anything to happen to my parts either!

    Sun 2009/11/29 03:11:35 JST (ID #57812)
    Reply
  •  
    wannbe17 (Registered on 2009/08/31)

    Well, the bubble wraps on the base are a good idea, but why only on the bottom if you can also do the sides? the sides can also cause some damge you know~

    Sun 2009/11/29 12:25:28 JST (ID #58003)
    Reply

Latest Posts
Popular from same category