2nd Obitsu Daughter!! :)
Sat 2010/01/23 04:46 JST
Im sooooo happy. Meyrin arrived today!!!
Im so happy.
She seems to like ranka.
But i have a question...... How do you take off here upper suit top thing?
She has a blue shirt under but i dont get it, and if it requires to take off her head please explain how to do that to. Thanks!!
Now to the pictures.
Only 2 pics need to charge camera and its dark for some reason.
This is how I did it... ^^; http://neoprolacus.spaces.live.com/blog/cns!57110DB35573F2A8!4561.entry
Haha BTW "Myzt An" who commented there is me :P
Unfortunately for the head, either:
1) try detaching the connector on the neck, and when the connector went into the head, change the body or put new connector OR
2) try removing the hair (it was glued), then detach the connector. For mine, afterwards I widen the hole under the head so that in the future I don't have to remove the hair anymore in order to detach the head. This method will leave some marks on the places that were glued though.
Pull down the neck covering and you will find a pin holding the head on. (These are the 27cm bodies, correct?) Drift the pin out and the head will come off. Reverse to put head back on.
Almost all Megahouse AFC are 27cm Obitsu, with the exception of Ranka which is 25cm Obitsu... Same peel down neck skin method tho... ^_^
The problem is, the peg will go straight into the head afterwards, coz the way the connector was inserted not same as normal doll (from bottom), instead, during production process, the connector was inserted from top of the head (the hair part was not assembled yet),and after the connector is secured, the hair part was put on top of the head and glued.
I think Yunamon tried to remove Meyrin's head using the normal method, resulting in the connector now "trapped" inside the head :P
Exactly! Now her head gives off rattle sounds when shakes... Talk about air head... XD
Little device called a "spring hook" would solve that problem.. :)